 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PM150RLB060 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 IntellimodTM L-Series Three Phase IGBT Inverter + Brake 150 Amperes/600 Volts E F L AB (4 PLACES) V H J K J K A D G M J K TERMINAL CODE 1 VUPC K 2 UFO 3 UP 4 VUP1 V Y V N W XB 1 5 9 13 19 5 VVPC 6 VFO 7 VP 8 VVP1 9 VWPC 10 WFO 11 WP 12 VWP1 13 VNC 14 VN1 15 Br 16 UN 17 VN 18 WN 19 FO AA Y Z V P N B U V W V S V T R P AE (2 PLACES) AK V U V V U V V U V AC (2 PLACES) Q AM AN AG AL AF AH AJ AD C VWPC Br FO VNC WN VN1 WFO VVPC VFO VUPC UP VN UN WP VWP1 VP VVP1 UFO VUP1 Description: Powerex IntellimodTM Intelligent Power Modules are isolated base modules designed for power switching applications operating at frequencies to 20kHz. Built-in control circuits provide optimum gate drive and protection for the IGBT and free-wheel diode power devices. Features: Complete Output Power Circuit Gate Drive Circuit Protection Logic - Short Circuit - Over Temperature Using On-chip Temperature Sensing - Under Voltage Low Loss Using 5th Generation IGBT Chip Applications: Inverters UPS Motion/Servo Control Power Supplies Ordering Information: Example: Select the complete part number from the table below -i.e. PM150RLB060 is a 600V, 150 Ampere IntellimodTM Intelligent Power Module. Type PM Current Rating Amperes 150 VCES Volts (x 10) 60 GND GND IN FO VCC GND GND IN FO VCC GND GND IN FO VCC GND GND IN FO VCC GND GND IN FO VCC GND GND IN FO VCC GND GND IN SI OUT SI OUT SI OUT SI OUT SI OUT SI OUT OT OT OT OT OT OT SI OUT B N W V U Outline Drawing and Circuit Diagram Dimensions A B C D E F G H J K L M N P Q R S T U Inches 4.72 2.17 0.63 4.17 0.28 0.78 2.62 0.13 0.63 0.08 0.10 2.81 0.20 0.31 3.87 0.87 0.10 0.77 0.91 Millimeters 120.0 55.0 16.0 106.0 7.0 19.75 66.5 3.25 16.0 2.0 2.5 71.5 5.0 7.75 98.25 22.0 2.5 19.5 23.0 Dimensions V W X Y Z AA AB AC AD AE AF AG AH AJ AK AL AM AN Inches 0.16 1.01 2.00 0.69 0.30 0.98 0.10 Dia. 0.22 Dia. 0.67 0.10 Dia. 0.33 0.08 0.41 1.08 0.04 0.02 Sq. 0.06 0.04 Millimeters 4.0 25.75 50.75 17.5 7.5 25.0 Dia. 2.5 Dia. 5.5 17.0 Dia. 2.5 8.5 2.0 10.5 27.5 1.0 Sq. 0.5 1.5 1.0 FO VCC OT P 1 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM150RLB060 IntellimodTM L-Series Three Phase IGBT Inverter + Brake 150 Amperes/600 Volts Absolute Maximum Ratings, Tj = 25C unless otherwise specified Characteristics Power Device Junction Temperature Storage Temperature Module Case Operating Temperature (Note 1) Mounting Torque, M5 Mounting Screws Mounting Torque, M5 Main Terminal Screws Module Weight (Typical) Supply Voltage, Surge (Applied between P - N) Self-protection Supply Voltage Limit (Short Circuit protection Capability)* Isolation Voltage, AC 1 minute, 60Hz Sinusoidal *VD = 13.5 ~ 16.5V, Inverter Part, Tj = 125C Symbol Tj Tstg TC -- -- -- VCC(surge) VCC(prot.) VISO PM150RLB060 -20 to 150 -40 to 125 -20 to 100 31 31 380 550 400 2500 Units C C C in-lb in-lb Grams Volts Volts Volts IGBT Inverter Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) Collector Current (TC = 25C) Peak Collector Current (TC = 25C) Collector Dissipation (TC = 25C) (Note 1) VCES IC ICP PC 600 150 300 480 Volts Amperes Amperes Watts IGBT Brake Sector Collector-Emitter Voltage (VD = 15V, VCIN = 15V) Collector Current (TC = 25C) Peak Collector Current (TC = 25C) Collector Dissipation (TC = 25C) (Note 1) Diode Rated DC Reverse Voltage (TC = 25C) Diode Forward Current VCES IC ICP PC VR(DC) IF 600 75 150 300 600 75 Volts Amperes Amperes Watts Volts Amperes Control Sector Supply Voltage (Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC) Input Voltage (Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-Br-VNC) Fault Output Supply Voltage (Applied between UFO-VUPC, VFO-VVPC, WFO-VWPC, FO-VNC) Fault Output Current (UFO, VFO, WFO, FO Terminals) IFO 20 mA VD VCIN VFO 20 20 20 Volts Volts Volts 2 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM150RLB060 IntellimodTM L-Series Three Phase IGBT Inverter + Brake 150 Amperes/600 Volts Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units IGBT Inverter Sector Collector-Emitter Cutoff Current Diode Forward Voltage Collector-Emitter Saturation Voltage ICES VEC VCE(sat) VCE = VCES, VD = 15V, Tj = 25C VCE = VCES, VD = 15V, Tj = 125C -IC = 150A, VCIN = 15V, VD = 15V VD = 15V, VCIN = 0V, IC = 150A, Tj = 25C VD = 15V, VCIN = 0V, IC = 150A, Tj = 125C Inductive Load Switching Times ton trr tC(on) toff tC(off) VD = 15V, VCIN = 0 15V VCC = 300V, IC = 150A Tj = 125C -- -- -- -- -- 0.5 -- -- -- -- -- -- 2.2 1.6 1.5 1.0 0.2 0.4 1.2 0.5 1.0 10 3.3 2.1 2.0 2.4 0.4 1.0 2.5 1.0 mA mA Volts Volts Volts s s s s s IGBT Brake Sector Collector-Emitter Cutoff Current Diode Forward Voltage Collector-Emitter Saturation Voltage ICES VFM VCE(sat) VCE = VCES, VD = 15V, Tj = 25C VCE = VCES, VD = 15V, Tj = 125C IF = 75A VD = 15V, VCIN = 0V, IC = 75A, Tj = 25C VD = 15V, VCIN = 0V, IC = 75A, Tj = 125C -- 1.5 2.0 Volts -- -- -- -- -- -- 2.2 1.6 1.0 10 3.3 2.1 mA mA Volts Volts Note 1:TC (base plate) Measurement Point TOP VIEW TC MEASUREMENT POINT Note 2: TC (under the chip) Measurement Point Y X BOTTOM VIEW Arm Axis X Y UP 29.0 -7.3 29.5 1.6 VP 64.6 -7.3 65.1 2.1 WP 85.9 -7.3 86.4 2.1 UN 38.1 5.3 37.6 -4.6 VN 54.8 5.3 55.3 -4.6 WN 76.1 5.3 75.6 -4.6 18.3 -7.4 Br 22.4 7.0 IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi IGBT FWDi 3 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM150RLB060 IntellimodTM L-Series Three Phase IGBT Inverter + Brake 150 Amperes/600 Volts Electrical and Mechanical Characteristics, Tj = 25C unless otherwise specified Characteristics Symbol Test Conditions Min. Typ. Max. Units Control Sector Short Circuit Trip Level (-20C Tj 125C, VD = 15V) Short Circuit Current Delay Time Over Temperature Protection (Detect Tj of IGBT Chip) Supply Circuit Under-voltage Protection (-20 Tj 125C) Circuit Current Input ON Threshold Voltage Input OFF Threshold Voltage Fault Output Current* Fault Output Pulse Width* SC toff(SC) OT OTR UV UVR ID Vth(on) Vth(off) IFO(H) IFO(L) tFO Inverter Part Brake Part VD = 15V Trip Level Reset Level Trip Level Reset Level VD = 15V, VCIN = 15V, VN1-VNC VD = 15V, VCIN = 15V, VXP1-VXPC Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-Br-VNC VD = 15V, VCIN = 15V VD = 15V, VCIN = 15V VD = 15V 300 150 -- 135 -- 11.5 -- -- -- 1.2 1.7 -- -- 1.0 -- -- 0.2 145 125 12.0 12.5 20 5 1.5 2.0 -- 10 1.8 -- -- -- 155 -- 12.5 -- 30 10 1.8 2.3 0.01 15 -- Amperes Amperes s C C Volts Volts mA mA Volts Volts mA mA ms *Fault output is given only when the internal SC, OT and UV protections schemes of either upper or lower devide operate to protect it. Thermal Characteristics, Tj = 25C unless otherwise specified Characteristic Junction to Case Thermal Resistance Symbol Rth(j-c)Q Rth(j-c)D Rth(j-c)Q Rth(j-c)D Rth(j-c)Q Rth(j-c)D Rth(j-c)Q Rth(j-c)D Contact Thermal Resistance Rth(c-f) Condition Inverter IGBT (Per 1/6 Module) (Note 1) Inverter FWDi (Per 1/6 Module) (Note 1) Brake IGBT (Per 1/6 Module) (Note 1) Brake FWDi (Per 1/6 Module) (Note 1) Inverter IGBT (Per 1/6 Module) (Note 2) Inverter FWDi (Per 1/6 Module) (Note 2) Brake IGBT (Per 1/6 Module) (Note 2) Brake FWDi (Per 1/6 Module) (Note 2) Case to Fin Per Module, Thermal Grease Applied (Note 1) ** If you use this value, Rth(f-a) should be measured just under the chips. Min. -- -- -- -- -- -- -- -- -- Typ. -- -- -- -- -- -- -- -- -- Max. 0.26 0.43 0.42 0.69 0.20** 0.33** 0.32** 0.53** 0.038 Units C/Watt C/Watt C/Watt C/Watt C/Watt C/Watt C/Watt C/Watt C/Watt Recommended Conditions for Use Characteristic Supply Voltage Control Supply Voltage*** Input ON Voltage Input OFF Voltage PWM Input Frequency Arm Shoot-through Blocking Time Symbol VCC VD VCIN(on) VCIN(off) fPWM tDEAD Condition Applied across P-N Terminals Applied between VUP1-VUPC, VVP1-VVPC, VWP1-VWPC, VN1-VNC Applied between UP-VUPC, VP-VVPC, WP-VWPC, UN- VN- WN-Br-VNC Input Signal Value 400 15.0 1.5 0.8 9.0 20 2.0 Units Volts Volts Volts Volts kHz s *** With ripple satisfying the following conditions: dv/dt swing 5V/s, Variation 2V peak to peak. 4 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM150RLB060 IntellimodTM L-Series Three Phase IGBT Inverter + Brake 150 Amperes/600 Volts COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE CHARACTERISTICS (TYPICAL - INVERTER PART) OUTPUT CHARACTERISTICS (TYPICAL - INVERTER PART) 200 COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) 160 120 80 40 0 15 VD = 17V 13 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) Tj = 25oC 2.0 1.5 VD = 15V Tj = 25C Tj = 125C 2.0 1.5 1.0 1.0 0.5 0.5 IC = 150A Tj = 25C Tj = 125C 0 0.5 1.0 1.5 2.0 0 0 30 60 90 120 150 0 12 13 14 15 16 17 18 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR-CURRENT, IC, (AMPERES) SUPPLY VOLTAGE, VD, (VOLTS) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL - INVERTER PART) REVERSE RECOVERY CURRENT, Irr, (AMPERES) REVERSE RECOVERY CHARACTERISTICS (TYPICAL - INVERTER PART) REVERSE RECOVERY CHARACTERISTICS (TYPICAL - INVERTER PART) 102 EMITTER CURRENT, IE, (AMPERES) 102 REVERSE RECOVERY TIME, trr, (s) 100 101 101 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25C Tj = 125C 10-1 VCC = 300V VD = 15V INDUCTIVE LOAD Tj = 25C Tj = 125C VD = 15V Tj = 25C Tj = 125C 100 0 0.5 1.0 1.5 2.0 2.5 100 100 101 102 103 10-2 100 101 102 103 EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) EMITTER CURRENT, IE, (AMPERES) EMITTER CURRENT, IE, (AMPERES) SWITCHING LOSS (ON) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) SWITCHING LOSS (OFF) VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 101 SWITCHING LOSS, ESW(on), (mJ/PULSE) SWITCHING LOSS, ESW(off), (mJ/PULSE) 101 101 VCC = 300V VD = 15V Tj = 25oC Tj = 125oC INDUCTIVE LOAD 100 100 SWITCHING TIMES, ton, (s) 100 10-1 VCC = 300V VD = 15V Tj = 25C Tj = 125C 10-1 VCC = 300V VD = 15V Tj = 25C Tj = 125C 10-2 100 101 102 103 10-2 100 101 102 103 10-1 100 101 102 103 COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) 5 Powerex, Inc., 200 E. Hillis Street, Youngwood, Pennsylvania 15697-1800 (724) 925-7272 PM150RLB060 IntellimodTM L-Series Three Phase IGBT Inverter + Brake 150 Amperes/600 Volts SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) SWITCHING TIME VS. COLLECTOR CURRENT (TYPICAL - INVERTER PART) 101 VCC = 300V VD = 15V Tj = 25oC Tj = 125oC INDUCTIVE LOAD 101 VCC = 300V VD = 15V Tj = 25oC Tj = 125oC INDUCTIVE LOAD 101 VCC = 300V VD = 15V Tj = 25oC Tj = 125oC INDUCTIVE LOAD SWITCHING TIMES, tc(on), (s) 100 100 SWITCHING TIMES, tc(off), (s) SWITCHING TIMES, toff, (s) 100 10-1 100 101 102 103 10-1 100 101 102 103 10-1 100 101 102 103 COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) COLLECTOR CURRENT, IC, (AMPERES) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth * (NORMALIZED VALUE) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi - INVERTER PART) OUTPUT CHARACTERISTICS (TYPICAL - BRAKE PART) COLLECTOR-EMITTER SATURATION VOLTAGE CHARACTERISTICS (TYPICAL - BRAKE PART) 101 COLLECTOR CURRENT, IC, (AMPERES) 100 80 60 40 20 0 100 Single Pulse TC = 25C Per Unit Base = Rth(j-c) = 0.26C/W (IGBT) Rth(j-c) = 0.43C/W (FWDi) 15 VD = 17V 13 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) Tj = 25oC 2.0 1.5 10-1 1.0 10-2 0.5 VD = 15V Tj = 25C Tj = 125C 10-3 10-3 10-2 10-1 TIME, (s) 100 101 0 0.5 1.0 1.5 2.0 0 0 20 40 60 80 COLLECTOR-EMITTER VOLTAGE, VCE, (VOLTS) COLLECTOR-CURRENT, IC, (AMPERES) NORMALIZED TRANSIENT THERMAL IMPEDANCE, Zth(j-c') Zth = Rth * (NORMALIZED VALUE) COLLECTOR-EMITTER SATURATION VOLTAGE VS. SUPPLY VOLTAGE CHARACTERISTICS (TYPICAL - BRAKE PART) FREE-WHEEL DIODE FORWARD CHARACTERISTICS (TYPICAL - BRAKE PART) TRANSIENT THERMAL IMPEDANCE CHARACTERISTICS (IGBT & FWDi - BRAKE PART) 2.0 COLLECTOR-EMITTER SATURATION VOLTAGE, VCE(sat), (VOLTS) EMITTER CURRENT, IE, (AMPERES) 102 101 1.5 100 Single Pulse TC = 25C Per Unit Base = Rth(j-c) = 0.42C/W (IGBT) Rth(j-c) = 0.69 C/W (FWDi) 101 1.0 10-1 100 VD = 15V Tj = 25C Tj = 125C 0.5 IC = 75A Tj = 25C Tj = 125C 10-2 0 12 13 14 15 16 17 18 10-1 0 0.5 1.0 1.5 2.0 2.5 10-3 10-3 10-2 10-1 TIME, (s) 100 101 SUPPLY VOLTAGE, VD, (VOLTS) EMITTER-COLLECTOR VOLTAGE, VEC, (VOLTS) 6 |
Price & Availability of PM150RLB060
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |